The secret to more power
and detail in your Audio setup
High End Class D modules used in our amplifiers give you all the power you need and more, while the sound is always clear, detailed and precise. Low frequencies are very present but controlled and the high frequencies are open, clear and glossy.
What Everybody Ought to Know About Class D modules
Highly Efficient
High end Class D modules are highly efficient, low weight and very low on radiated and conducted EMI. Requiring only about 1/3 of the power from the wall compared with a conventional amp and running cooler, thus eliminating the need for big enclosures and heatsinks.
Breathtaking Fidelity
Modern Class D amps achieve high fidelity that is comparable to those of Class AB amps, especialy when coupled with a superior Class A input buffer section with discrete voltage regulators and Class A Op Amps.
Grandiose Transparency
Transparent and sonically accurate, sounding better than conventional amplifiers, providing immense power and headroom, often making you hear things in music that you never heard before.

Introducing Apollon Class D Amplifiers

Apollon Audio is a company specialised in hand building premium quality Class D amplifiers using only high end Class D modules and components.

Tibor Marksel, the founder of Apollon Audio is a seasoned audio and mastering engineer with a trained ear and more than 15 years of experience in the recording industry. His attention to detail and perfectionism is present in every product that he makes. Throughout his career he had the chance to listen to numerous configurations of speakers and amplifiers, but he was never fully satisfied with what he heard. This lead him on a quest to build an amplifier that would meet his demands for high power and dynamics, while at the same time have the record sound exactly how the mixing and mastering engineers have put it together in the studio, and enjoy that exact sound at home.

This all finaly became possible after implementing high end Class D modules and getting creative with Class A Op Amps.

Introducing Apollon Class D Amplifiers

Apollon Audio is a company specialised in hand building premium quality Class D amplifiers using only high end Class D modules and components.

Tibor Marksel, the founder of Apollon Audio is a seasoned audio and mastering engineer with a trained ear and more than 15 years of experience in the recording industry. His attention to detail and perfectionism is present in every product that he makes. Throughout his career he had the chance to listen to numerous configurations of speakers and amplifiers, but he was never fully satisfied with what he heard. This lead him on a quest to build an amplifier that would meet his demands for high power and dynamics, while at the same time have the record sound exactly how the mixing and mastering engineers have put it together in the studio, and enjoy that exact sound at home.

This all finaly became possible after implementing high end Class D modules and getting creative with Class A Op Amps.

Class A sound without boundaries

Apollon audio amplifiers that are based on the Hypex NC1200 Class D modules use a custom built buffer board on the input stage. The buffer board is using only the highest quality 1% metal film resistors and true audiophile grade polystyrene capacitors while the power for the Op Amp is regulated with discrete voltage regulators.

You are able to choose from various Op Amps that match your style and flavour. This is what makes all the difference in the sound and enables the Hypex NC1200 to work to its fullest potential, giving you pleasure each and every time you play your favourite recording.

Keeping your cables short aside from using high quality cables is a good way to preserve the audio signal in its full quality. If you prefer this way of powering your speakers our Hypex based Class D monoblock amplifiers are the best fit for the job.

Availiable with Hypex NCMP modules and now also with Hypex NC1200 modules coupled with our capable input buffer board using Sonic Imagery or Sparkos Labs op amps.

Breathe new life into your stereo speakers with our Apollon Audio stereo amplifiers based on Hypex Class D modules. The smallest stereo amplifier starts at 75W @8ohm per channel and the most powerfull amplifier packs remarkable 1600W @8ohm.

We only use proven Class D modules from Hypex that are the industry leaders in Class D development and sound quality, paired with our custom input buffer boards for thrilling musical enjoyment.

When you need to supply your expensive surround system with ample amount of power there is no better way to do this than with our range of Hypex based multichannel amplifiers.

You have the option of choosing four, six or eight channel amplifiers that are built around the Hypex NCMP series modules that sound grandiose and will provide you with ecstatic sound wether enjoying a movie or listening to a live concert performance that was recorded in surroud technology.

Make the best out of your 2 or 3 way speakers with energetic and critical Hypex Class D modules built into our 2-way and 3-way amplifiers. Altough lightweight the amplifiers provide tremendeous power to your speakers.

With Hypex NCMP modules driving the low and the midsection and the acclaimed Hypex NC100HF feeding your tweeters you can expect mind-blowing sound reproduction with unbelieveable low and mid frequencies paired with startling high frequencies thanks to the NC100HF module.

Monoblock Amplifiers

Keeping your cables short aside from using high quality cables is a good way to preserve the audio signal in its full quality. If you prefer this way of powering your speakers our Hypex based Class D monoblock amplifiers are the best fit for the job.

Availiable with Hypex NCMP modules and now also with Hypex NC1200 modules coupled with our capable input buffer board using Sonic Imagery or Sparkos Labs op amps.

stereo Amplifiers
Breathe new life into your stereo speakers with our Apollon Audio stereo amplifiers based on Hypex Class D modules. The smallest stereo amplifier starts at 75W @8ohm per channel and the most powerfull amplifier packs remarkable 1600W @8ohm.

We only use proven Class D modules from Hypex that are the industry leaders in Class D development and sound quality, paired with our custom input buffer boards for thrilling musical enjoyment.

multichannel Amplifiers
When you need to supply your expensive surround system with ample amount of power there is no better way to do this than with our range of Hypex based multichannel amplifiers.

You have the option of choosing four, six or eight channel amplifiers that are built around the Hypex NCMP series modules that sound grandiose and will provide you with ecstatic sound wether enjoying a movie or listening to a live concert performance that was recorded in surroud technology.

2-way and 3-way Amplifiers
Make the best out of your 2 or 3 way speakers with energetic and critical Hypex Class D modules built into our 2-way and 3-way amplifiers. Altough lightweight the amplifiers provide tremendeous power to your speakers.

With Hypex NCMP modules driving the low and the midsection and the acclaimed Hypex NC100HF feeding your tweeters you can expect mind-blowing sound reproduction with unbelieveable low and mid frequencies paired with startling high frequencies thanks to the NC100HF module.

What our clients say about our amplifiers

Just some of the testimonials we received in our email and found on the internet which tell us that we are on the right path.

“I’ve had the amp for about a week and a half now and I’m enjoying it quite a bit.  It’s opening up nicely and the depth and detail are excellent.  I’ve had to adjust my subs (dual Rythmik F15s) down a bit because, I believe, my Tylers are now being driven more to their potential. Excited to hear if things open up even more.

Very happy so far with my purchase.  Thanks again!”

Rich Stratton (Atlanta, USA)
http://www.rtmastering.com

“The amp sounds amazing. Everything you said about the amp is true. Super accurate, super precise and fast. I rediscovered my NS10s.”

Dominique Meyer (Switzerland)

“I received the amplifiers, I thank you again for the quality of manufacture. I will do a very good publicity for Apollon Audio.”

Cyril Khoudir (France)

I just bought a Apollon Amp this week based on Hypex NC500 modules.A fresh company from Austria… they know what they do and their amps sound phenomenal.
This amp costs 1490€ incl. VAT and built quality is one of the best I’ve seen. I don’t see the reason anymore now, to spend money on other manufactures who charge much more. Highly recommended “

midmost

on gearslutz.com forum